Subject | Text |
Re: 25" Console TV Need To Release Vacuum Safely | [quote:9a7acdf5ff="AshTray900"]Is there a way to stabalize the vacuum in a CRT tube without causing |
which is the role of the vacuum in an incandescent lamp | which is the role of the vacuum in an incandescent lamp? |
|
25" Console TV Need To Release Vacuum Safely | Is there a way to stabalize the vacuum in a CRT tube without causing it to implode, I dont want to j |
Re: Please help : My Panasonic television isn't well at all! | [quote:a0ee332b43="ArthurLee"]About 3 weeks ago, my Panasonic TV started to switch to standby mode q |
| It is demagnetize --not demagnify. Any TV servicer with a degauser coil can do that. In general ever |
| hello to you all,
i personally followed every single step that OceanOver recommended and at the e |
semiconductor equivalent | I everybody!
Maybe someone could help me finding an equivalent part and the specs for that semicond |
| If it is a conventional CRT tv and the discoloration is there also when viewing a monochrome picture |
Please help : My Panasonic television isn't well at all! | About 3 weeks ago, my Panasonic TV started to switch to standby mode quite regularly and, during the |
| Hello, you cannot fix it properly thru the service menus. Luckily I've found a way to fix the bright |
PCG-FX802(FR) | have a laptop SONY: MODEL: PCG-FX802 (FR) My computer will not turn on, the power sector and the bat |
miele B865 rotary ironer | Hi is there anyone out there familiar with this rotary ironer that can assist with a roller drive pr |
Marconi TF1041C Vacuum tube Voltmeter | Hi, I wish to know if anyone knows the highest RF frequency that this 'old' instrument can indicate- |
| Circa 1979..that is an oldie, Not sure if compressed air is going to do anything. Contact cleaner su |
Re: Blaupunkt CDC F07 | [quote:4156e5389c="kentishbh"]HI,
Anyone has an idea on repiars for this changer.
Cd Changer w |
F61 error | :) Yerp I agree with the other reply something in the audio system but it could be the CD read lamp |
| Hi!
you have the High Voltage on vac.. if you hear dry burst during turning on tv-set;
you have h |
|
| Grtz Mark, Sparky
Thanks for your help.
No sign of the head cleaner sponge roller - the Tos |
| Was it the switch or the connections where it is soldered? Ought to look [b:fa535f7406]very[/b:fa535 |
| More than likely spindle motor is on it's way out. Unfortunately almost all of these units use the |
| [quote:38748f7c21="vtech"]In looking at your first set of pictures, apparently those are in fact rot |
| Well I took the back off and tried to vacuum up some of the dust, took the fuses out check and clean |
Magnavox AND Memorex VCRs - tape cooties?? | Two different VCRs - both now only showing static/snow after playing the same tape (old tape from ea |
H/K AVR 25II - protect mode only with center channel | Hi,
First thanks for the tech manual/schematics! Wonderful start. I can sort of read schematics a |
| [quote:b5710eaa25="RODALCO"]To avoid the burning up and oxidising of the tungsten filament in air.
|
National VP-5220A Repair Help Please. | I've just recently been given a National VP-5220A oscilloscope. I was awfully excited as I've always |
| You don't need to clean the knobs, but hot soapy water and a small nylon brush will clean them if th |
| Grtz Mark
Thanks for your prompt reply.
The video heads were cleaned with chamois cleaner pa |
Oreck xl Signature Air Purifier | Does anyone have a schematic or information on this electrostatic air cleaner? Or know anything abou |
| [quote:28db252403]Have you tried spraying with a 'safe-for-plastics' contact cleaner and working the |